Chromatography Tubing
Analytical Sales & Services SS Tubing .046” X 1/16” X 30cm
This item has a minimum order quantity of 3 per supplier requirements. SS TUBING .046 X 1/16 X 30SS
Microsolv Technology Corporation Tubing, PEEK, 0.030" ID, 1/16" OD, General Grade, Green. 5 Meter Roll. 1 EA.
This General Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives and is often used in HPLC laboratories. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color Code: Orange for 0.030" ( 0.75mm ) ID. Pressure rating: 3500 psi.
Microsolv Technology Corporation Tubing, Capillary, PEEK, 75um ID, 360um OD, Natural Color. 10 Meter Roll. 1 EA.
This small OD, PEEK, capillary tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color: Natural. Pressure rating: 5200 psi.
Microsolv Technology Corporation Tubing, PTFE, 0.010" ID, 1/16" OD, Low Pressure. 20 Meter Roll. 1 EA.
This MicroSolv PTFE ( Polytetrafluoroethylene ) Tubing is extruded from virgin PTFE, manufactured exclusively by DuPont. We do not add any additives to the original PTFE material, except for particles for color coding. This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump such as with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for for use with degassed and oxygen-sensitive solvents is needed. Internal and Outer Dimensional Tolerance: +/- 0.20mm Color: Natural PTFE, Translucent ID: 0.010" ( 0.25mm ) Pressure rating: 800 psi.
Microsolv Technology Corporation Tubing, PEEK, 0.010" ID, 1/16" OD, HPLC Grade, Blue Stripe. 5 Meter Roll. 1 EA.
This HPLC Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The red stripe is added only to the outside of the tubing leaving the interior all natural PEEK which eliminates leachables due to color. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color Code: Blue Stripe for 0.010" ( 0.25mm ) ID. Pressure rating: 5600 psi.
Microsolv Technology Corporation Tubing, PEEK, 2mm ID, 1/8" OD, Natural Color. 10 Meter Roll. 1 EA.
This wide outer diameter, Laboratory Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color: Natural. Pressure rating: 2400 psi.
Microsolv Technology Corporation Tubing, PEEK, 0.020" ID, 1/16" OD, HPLC grade, orange stripe. 25-meter roll. 1 EA.
This HPLC Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The orange stripe indicating size is applied to the outside of the tubing leaving the interior all-natural PEEK which eliminates color leachables. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color Code: Orange Stripe for 0.020" ( 0.50mm ) ID. Pressure rating: 4500 psi with proper mobile phase conditions.
Perkin Elmer US LLC Standard Diffusion Cap Assemblies, 10 ea.
Includes the following pieces: 20 Viton O-Rings, Size 010 (04970343) 10 Stainless Steel Metric Retaining Rings (09919191) 10 Diffusion Caps (L4071033) 10 Retainers, 60 Mesh (L4071035) 30 Membrane Supports (L4071079)
Perkin Elmer US LLC 4 mm, Ultra Deactivated Single Low Pressure Drop Precision Liner with Wool
Inlet liners for split injection have mixing chambers with tortuous flow paths to allow full vaporization of the sample. Deactivating the surface of these liners prevents active compounds from degrading. Packing the liner with wool will trap non-volatile residue and prevent column contamination when analyzing dirty samples. Inlet liners for splitless injection are generally designed as straight tubes, although new designs such as the gooseneck will help contain the sample in the injector. Packing these liners with wool will also help trap non-volatile residue and prevent column contamination. For the capillary injector on the Clarus 590 or 690 GC system.
Perkin Elmer US LLC Auto-Ignite FID Nozzle Assembly
For use with Auto-Ignite Flame Ionization Detector (FID).
Waters Corp Tubing Assembly, Inject Out to HPLC Column
ACQUITY BSM Tube Assy. Inject Out, .005 x 11 inches long and has HPLC fitting on column end
Waters Corp Tubing Assembly, HPLC Stainless Steel Inlet, .005 in ID x 24 in
HPLC Stainless Steel Inlet Tubing, .005ID x 24 long for ACQUITY 30cm Collumn Heater/Cooler
